Surface mounting posts, where possible, increases the longevity of a post. The low profile look of the post anchor gives you improved appearance compared to many wrap around style brackets.
Proper installation requires the following hardware for a wood surface installation:
(8) 1/4 x 4" Flat Head Screws
(4) 3/8 x 5" Hex Head Lag Screws
Also see Instructions height restrictions and proper installation.
Optional Post Brace for maximum strength (sold separately)
With the Titan Post Anchor, you can enjoy the beauty of wood posts without big, unsightly, ugly, anchoring brackets on more surfaces.
+ No notching decking
+ No complicated carpentry, framing or hardware
+ Posts are higher and drier for longer life
Use an off the shelf 1-1/4" dia. by 2" deep hole saw to cut a pilot cut for the tube.
Use a 1-3/4" dia. hole saw for 6x6 and 8x8 post anchors.
Use a 3 lbs mini sledge to drive tube into post beyond the depth of hole saw cut.
Pre-drill holes and drive lag screws into the post.
A sharp-edged, lightweight, rigid tube cuts deep into the core of the wood post and holds the post and anchor together longer that just screws alone. This makes the connection more visually appealing. Where more strength is desired, use an optional Post Brace.
A truly innovative and effective solution.
To properly secure the post anchor to a wood surface, ensure that there is wood blocking like a 2x6 or 2x8 below the deck boards and between the joist.
Pre-drill the screw holes if they are too close to the edge of a board to prevent splitting.
A sharp-edged, lightweight, rigid tube cuts deep into the core of the wood post and diverts enough load away from the screws to increase the overall load resistance.
A truly innovative and effective solution.
It is now possible for a surface mounted anchor to be used for residential code compliant wood railings.
Set one screw to secure the anchor while pre-drilling the other holes. Drill 1/2" deeper than the length of the screw.
Once the holes are drilled, remove the template anchor and position the post and anchor over the holes for attachment.
One concrete screw per corner is enough to keep the post and anchor secure given the pull-out resistance of each screw.
This model will work with posts between 3-½" and 4" square.
This model works with nominal 4x6 posts and up to true 4"x 6".
Great for railings, pergolas, pavilions and support columns. Secures posts between 5-½" and 6" square.
The model is often used for large timber construction projects and secures posts between 7-¼" to 8" square.
The Titan Post Anchor has been independently tested by world-renowned engineering firm Intertek for residential compliance in the United States and Canada when installed at recommended post height and spacing.
The USA tests have been carried out in accordance with AC273 for Handrails and Guards as set out by the IRC. Canadian tests have been done in accordance with the Canadian Building Code with applicability for all ten provinces.
For a copy of the sealed engineering reports including compression and tension testing click here.
The 4x4 and 6x6 Post Anchors have been tested by Intertek for certain limited residential applications in the USA and Canada. It may not be suitable for guard rails in your area. See Intertek engineering reports for guidance about your intended use.
Download a full-size copy of the Warranty.
replaced one that I had
replaced one that I had damaged due to hitting a knot
Porch Posts
Product worked as advertised and is well made.
Great product!!
As expected and really does create an effective, strong mount for deck railing. Easy to assemble to 4 X 4 posts - all in all a great concept!
Take a selfie video with your deck or project in the background and post it to Instagram or Facebook using hashtag #DecksGo.Then email it to decksgo.com and we will send you a Starbucks Gift Card.
By clicking the checkmark, I agree to receive news, offers and other promotional materials from DecksGo. I understand that I can unsubscribe at any time.*
View Cart
