- Home
- Tools
Tools
Impact Socket Bundle
$33.99
These essential Deep Impact Sockets are designed to perfectly match the hexagon drive heads of our Tie Down Ground Anchor and Deck Foot Anchor™. Made of impact resistant Chrome Vanadium, with 2" deep cavities and six points you can be confident that you will never strip the drive head. Available in 12mm and 24mm for the drive head and the compre...
Hole Saw & Arbor
$24.97
Use our Hole Saw with Arbor for preparing posts for installing the Titan Wood Post Anchor. The circular cut guides the sharp edged tube into the post. The 1-¼" saw is for the 4x4 post anchor and the 1-3/4" saw is used with the 6x6 post anchor. The depth of the saw is only 1-7/8" but don't let that fool you. The tube on the post anchor is longe...
Impact Socket
$19.97
These essential Deep Impact Sockets are designed to perfectly match the hexagon drive heads of our Tie Down Ground Anchor and Deck Foot Anchor™. Made of impact resistant Chrome Vanadium, with 2" deep cavities and six points you can be confident that you will never strip the drive head. Available in 12mm and 24mm for the drive head and the compre...
Center Guide for Hole Saws
$5.27
Our Center Guides quickly locate and guide hole saws to the center of either 4x4 or 6x6 posts for preparing to use the Titan Wood Post Anchor. No more tracing out diagonal lines for pilot cuts.Just hold against the corner of the post and saw against the vertical guides. Works for nominal 4x4 (3-½" x 3-½") and 6x6 (5-½" x 5-½") posts.
Auger Tool
$12.99
The Auger Tool allows you to install the auger by hand in combination with a 2x4. Great for both the Deck Foot or Fence Fin installations if you are working in tight spaces or only need to install one or two augers. Made of 6 ga. (4mm) galvanized steel precisely laser cut to fit the auger drive head. Installs to a 2x4 with two #10 x 2" screws (...
Deck Devil Board Straightener™ by Titan
$129.99
The Deck Devil Board Straightener™ is most versatile board straightener you will find. "I just wanted to thank you for your wonderful Deck Devil product. I ordered it and it proved to be just the right tool for the job. Thanks for making a product that works!" - Doug Johnson - Elbert, CO This telescopic compact device attaches to any hand held ...
#3 Square Six Inch Driver Bit
$6.95
Make sure to use this #3 Driver Bit when installing your Titan Wood Post Anchors to make sure you have the perfect fit for your wood screws. The long length of the bit allows for easy access to the base of your post for easy installation.
Hammer Tool - Universal Size
$9.95
The Universal Hammer Tool is fantastic little friend on a job site if you have lots of post anchors to install.Whether its one anchor or many, you will find our Universal Hammer Tool for 4x4, 6x6 and 8x8 anchors makes it much easier and efficient driving the tube into posts.It firmly mates with the shoulder portion of the tube and evenly distrib...
Hammer Tool - 44
$9.95
Whether its one anchor or many, you will find our Hammer Tool for 4x4 anchors makes it much easier and efficient driving the larger tube into a post.The tool sits more snug into the tube than our Universal Hammer Tool and rests on the shoulder. It's designed only for the 4x4 post anchors. Ensures the force of each hammer strike is distributed ev...
Auger Extension
$30.79
INCREASE AUGER LENGTH EASILY AND QUICKLY Turn our 3' or 4' augers into 5' or 6" augers with this simple to use 24" Auger Extension. Great for sandy or granular soils or on slopes. and works well in most clay soils. Threads easily to other augers. Uses a M16 2.0 thread. Rigid screw and bracket system allows auger to be retracted if necessary....
3/8" x 1-7/8" Hex Socket Driver
$9.99
This 3/8" Hex Socket Driver is just what you need for driving our Self-Drilling metals screws when you use our Pergola Post Brackets for variable-sized posts with the Deck Foot Anchor. The driver is 1-7/8" long making it easy to maneuver and use with our #14 self-drilling metal screws.
T27 Six Lobe Driver Bit
$5.99
Never strip a screw drive head again! This six lobe T27 Driver Bit fits our new #14x4' Flat Head screws that come with the Titan Wood Post Anchor kits. For years the Titan Wood Post Anchor Kits included a #3 Square Drive flat head screw and it was easy to mistake the drive for a #2 driver bit which could strip the #3 drive head. Be sure to grab...